Browse Items (48 total)

  • Tags: fitter engine

PYoungJ1703.jpg
Two identical photographs of Halifax Ferdinand II being serviced. In the top left corner one ground crew is standing at the top of a ladder looking at the nose of the aircraft. The nose has nose art of a cartoon character of a bull and the title…

BArcherSWArcherSWv10001.jpg
Stanley Archer’s account of his training as one of the first flight engineers for Lancaster operations in 1942. First he attended an air gunnery course then transferred to 97 squadron at RAF Woodhall Spa. He comments on a daylight operation on…

BBriggsDWBriggDWv1.pdf
Describes wartime service from 1939 to 1945. Joined as Halton apprentice in September 1939. Posted as fitter engine to RAF Wittering working on Wellington Hampden and Manchester aircraft. Followed by tour at RAF Upper Heyford working on Wellington…

PBriggsDW1701.jpg
Donald Briggs was born in Lealholm near Whitby in Yorkshire. After school, he became an apprentice with the Royal Air Force. He trained at RAF Halton in 1939 and became an engine fitter working on Wellingtons and Manchesters. He volunteered for air…

PCooperS1501.jpg
Sidney Cooper was born in Blackpool and joined the Royal Air Force in 1941. He first served as an engine fitter in Fighter Command before remustering as aircrew. He flew operations as a flight engineer with 427 Squadron from RAF Leeming. He later…

PBlandC1501.jpg
Charles Bland joined the Royal Air Force in February 1942 and went to RAF Halton as an Aircraft Apprentice.
He tells of his training at Halton, and describes the different trades and his exams to become an Leading Aircraftsman 1st Class, where he…

PBunceFSG1609.jpg
Sidney Bunce grew up in Buckinghamshire and worked in a butchers and a dairy. He volunteered for the Royal Air Force aged 18 and trained as a flight mechanic engineer. He served with 115 Squadron at RAF Witchford and at RAF Wratting Common with 195…

PCoultonWA1608.jpg
William Coulton was born in Derbyshire and worked as an errand boy for the Co-Op until he joined the Royal Air Force in 1943, aged 18. He trained as a flight mechanic and was posted to 115 Squadron at RAF Witchford where he worked on Lancasters. He…

PFranklinJB1616.jpg
Jack Brown Franklin grew up in Liverpool and worked in a paper merchants. He discusses Liverpool being bombed and his service in the Local Defence Volunteers. He joined the Air Force in 1941 and trained as an engine mechanic. He served with 109…

AGoldstrawBJ160827.mp3
Basil Goldstraw was classed as medically unfit for aircrew and following training as a fitter, he was posted to 75 Squadron at RAF Mepal. He discusses aspects of his work as a fitter, being bombed, and life on and off the station. He was posted to…

AGreenKS150713.mp3
Kenneth Green was born on the 17th January 1922 at Pleasley, near Mansfield and worked with the Carlton Auxillary Fire Service before joining the Royal Air Force at the age of 20.
He trained as an engineer after he was unable to fly due to eye…

AWarrenH160325.mp3
Interview in which he describes joining the RAF in 1938 and worked as ground crew. After training in Canada, he became a flight engineer and worked on Sunderlands flying from RAF Greenock.

PLancasterJ1501.jpg
After leaving school, Jo Lancaster was an aircraft apprentice with Armstrong Whitworth Aircraft Company in Coventry. After volunteering for the Air Force, he trained as a pilot and completed a tour on Wellingtons with 40 Squadron from RAF Alconbury.…

PStockerEE1601.jpg
Ted joined the air force in January 1938 as an apprentice at RAF Halton. This was accelerated because of the war, and he was posted to RAF Boscombe Down.
Although he wanted to be a pilot, Ted’s skills were needed as a flight engineer. He was…

PLoganF1501.jpg
Fred joined the Royal Air Force in Sheffield on 4th December 1940 and was accepted as a direct entry fitter. He went to the training school in Hednesford, where he was taught about engines, and was then posted on Stirlings to 7 Squadron. From RAF…

PMonkR1501.jpg
Roy Monk remembers days spent in the air raid shelters as a schoolboy during the war. After the war he wanted to be a policeman before he was called to National Service. After training to be a mechanic he was posted to RAF Upwood. Then he was posted…

PBarrettR1703.jpg
Raymond Barnes worked in factories before he joined the RAF. He trained as an engine fitter. He was posted to the Mediterranean, the Middle East and the Far East. He was servicing Spitfires for 242 Squadron and then Dakotas for 267 Squadron. He was…

SMathersRW55201v10003.jpg
Photograph 1 is the nose of a Lancaster. Two airmen are on a platform working on the port engine. it is captioned 'The Aircraft by Night (WS-R) EE136 The boys get "R" Roger ready for a trip'.
Photograph 2 is partly obscured. A group of airmen…

AAdamsCB170802.mp3
Cyril was born in London in 1921 and lived in Battersea with his relatives; he met his wife in 1940 while working at Harrods. His family were killed by bombing after he joined up. Cyril enlisted at RAF Cardington in 1941 and was trained to be a…

PCulkinJ1702.jpg
Jean Culkin grew up in Sunderland and worked as a tea girl and then a typist in a reserved occupation. She discusses her life and her wedding to her husband, John George Mackel Culkin. He was an apprentice at RAF Halton before becoming a fitter…

AJacksonDM171130.mp3
David Jackson tells of his father, Norman Jackson VC, born in Ealing, London in 1919 and who worked in an engineering company when the war broke out. After initially trying to join the navy, he then joined the RAF and classified as a fitter on…

PLunnR1601.jpg
Reg Lunn was living in Fulham and working as an apprentice printer when he volunteered for the RAF. He had wanted to be aircrew but he was colour blind and so failed the medical. He joined as an engine fitter and was posted to 48 Squadron at RAF…

DWynn146838.pdf
Diary commences on joining Royal Air Force Volunteer Reserve 3 October 1940 and training at Babbacombe, Newquay and passing out as an aircraft fitter. Posting to RAF Kenley 6 January 1942 and association with fighter pilots Bluey Truscott, Paddy…
Output Formats

atom, dc-rdf, dcmes-xml, json, omeka-xml, rss2