Browse Items (66 total)

  • Tags: Dominie

PTempleL1501.jpg
Leslie Temple spent four years in the Air Training Corps before joining the Royal Air Force as a radio operator. He completed a tour of 30 operations with 101 Squadron at RAF Ludford Magna, as a German speaking special operator. He describes how…

LColeC1605385v1.pdf
Navigator’s, air bomber’s, air gunner’s and flight engineer’s flying log book for Warrant Officer Colin Cole from 5 August 1943 to 23 September 1946. Detailing training schedule and operations flown. Served at RAF Yatesbury, RAF Mona, RAF…

LWoodC1451225v1.pdf
The log book covers the training, operational career and and post war flying of Colin Wood from 8 July 1943 to 7 February 1946. He trained in Canada and in Great Britain and was stationed at RAF Metheringham, RAF Coningsby and RAF Full Sutton. …

LGrimesS1271597v1.pdf
Royal Air Force observer's and air gunner's flying log book for Sydney Grimes, wireless operator, covering the period from 2 July 1942 to 22 August 1945. Detailing training, operations flown, instructional duties and post war flying. He was stationed…

AHayleyCA160224.mp3
Jack Hayley was born in Caterham and worked for an insurance company before he joined the Royal Air Force and trained to be a pilot. He trained to fly in Canada and after going through an Operational Training Unit in England, he was posted to 625…

AAtkinsonA150623.mp3
Arthur Atkinson was born in Lancaster, and worked in the local Co-Op until he joined the Royal Air Force. He trained as a wireless operator and served at RAF Ringway before being posted to RAF Coningsby and later RAF Skellingthorpe with 61 Squadron.…

ELampreyPGuntonW410618.pdf
Peter Lamprey writes about taking his final exams in a few weeks and that he was successful in his air test last week. He noted that most aboard a Dominie trainer were ill and that he has applied for night fighters.

ABarfootWE151208.mp3
Bill Barfoot was born in Newcastle upon Tyne. On joining the Air Force, he trained as a wireless operator but remustered as aircrew. He trained as a navigator in South Africa. He flew operations with 296 Squadron supplying the French and Norwegian…

PPayneR1706.jpg
Reg Payne was born in Kettering, he left school at fourteen and worked for the British Legion. He volunteered for the RAF when he was seventeen and a half and trained as a wireless operator and air gunner. He describes his training learning Morse…

PWoolfAS1701.jpg
Arthur Woolf was working in an office before he volunteered for the RAF. He was keen on flying and would cycle to Castle Bromwich airfield to watch the aircraft. He was accepted for aircrew training and became a wireless operator. After joining a…

LRascal-Mascot[Ser#-DoB]v1.pdf
Aircrew Mascots flying log book for Flight Sergeant Rascal, covering the period from 17 November 1942 to 29 March 1945 (pages not all in chronological order). Detailing his flying caeer during training and operations. He was stationed at RAF Kinloss,…

LHayleyCA1463437v1.pdf
Pilots flying log book for Jack Hayley, covering the period from 9 June 1942 to 30 June 1950. Detailing his flying training, operations flown and post war flying. He was stationed at, RAF Newquay, RAF Clyffe Pypard, RAF Heaton Park, RCAF Moncton,…

LDeytrikhA1381508v2.pdf
Pilots flying log book for Andrew Deytrikh, covering the period from 20 February 1944 to 15 October 1950. Detailing his flying training, operational flying and test flying. He was stationed at RAF Hornchurch, RAF North Weald, RAF Bognor, RAF…

AAllenWH170331.mp3
William Allen’s father had served with the Fleet Air Arm during the First World War. William also wanted to fly and so volunteered for the RAF at the earliest opportunity. He trained as a wireless operator. The crew arrived on the squadron and the…

LHobbsFJ1262633v1.pdf
Observers and air gunners flying log book for Frank Hobbs, wireless operator, covering the period from 15 March 1941 to 16 March 1943 when he was killed in action. Detailing his flying training and operations flown. He was stationed at RAF Pembrey,…
Output Formats

atom, dc-rdf, dcmes-xml, json, omeka-xml, rss2