Browse Items (66 total)

  • Spatial Coverage is exactly "Wales--Glamorgan"

AJonesPWA171207.mp3
Peter William Arthur Jones (b. 1954) speaks about his father Thomas John Jones DFC (b. 1921, 1640434 and 184141 Royal Air Force). Peter Jones discovered a memoir written by his father, Thomas Jones, a flight engineer, just after he passed away. Peter…

PJonesPW16010013.jpg
Three quarters portrait of Sergeant Tom Jones., captioned on the reverse 'Tom Jones Aug 1943 RAF St Athan'.

This page is an entry point for a place. Please use the links below to see all relevant documents available in the Archive.

AOrmorodJ170207.mp3
John Ormerod left school at 14 and worked in the textile industry before he volunteered for RAF. At first he trained as flight mechanic but later remustered to be a flight engineer. He talks about synchronising props and the German speaking eighth…

PHowB1601.jpg
Bernie How was 14 when war was declared and remembers aircrew socialising at his father's pub. He volunteered for the RAF at 17 and trained as a flight engineer on Stirlings. He describes a crash on take-off in a Stirling. He completed 35 operations,…

PMayBJ1601.jpg
Ben was born in 1925 in Kent and his first job was in the gas works. A member of the Air Transport Command, he was called up in 1944 and after initial training at RAF Locking he joined No.4 flight engineers course at RAF St Athan for one year. He…

PPettyD1601.jpg
Born in Shildon, County Durham Doug Petty was a car maintenance apprentice before joining the Royal Air Force in 1942 as a flight engineer.
He completed technical training at RAF St Athan, where he met Betty, his future wife. From there Doug went to…

ASnowballM150626.mp3
Maurice Snowball was born and educated in Sunderland. After school, he served an engineering apprenticeship with a local family firm and was a member of the Home Guard. Maurice was a keen amateur footballer and had hopes of turning professional, but…

PBarrettR1703.jpg
Raymond Barnes worked in factories before he joined the RAF. He trained as an engine fitter. He was posted to the Mediterranean, the Middle East and the Far East. He was servicing Spitfires for 242 Squadron and then Dakotas for 267 Squadron. He was…

LAmbroseBG1604870v1.pdf
Navigators, air bombers, air gunners and flight engineers flying log book for Basil Ambrose, flight engineer, covering the period from 5 July 1944 to 11 July 1946. Detailing engineers training, flying training and operations flown and post war…

LWarnerJ1623709v1.pdf
Navigator's, air bomber's and air gunner's flying log book for Jack Warner, flight engineer. Covering the period from 2 July 1943 to 28 January 1945. Detailing his flying training and operations flown. He was stationed at RAF Topcliffe, RAF Leeming,…

PAskewMV1801.jpg
Maurice Askew volunteered for the RAF and began training as a flight engineer. He was posted to 207 Squadron at RAF Spilsby and his first operation was to Berlin. On his last operation his aircraft came under attack. He was knocked unconscious as he…

ABaileyCE180424.mp3
Cyril Bailey was working in a garage before he volunteered for the RAF. He considered that he would like to be a mechanic but was told there were no vacancies and he was encouraged to become a flight engineer. He joined 625 Squadron at RAF Kelstern…

LFraserDK1566621v1.pdf
Navigator’s air bombers and air gunner’s flying log book for Donald Fraser DFM, flight engineer, covering the period from 17 July 1943 to 25 February 1946. Detailing his flying training, operations flown and instructor duties. He was stationed at…

ABraithwaiteH180421.mp3
Harry Braithwaite was born in Portinscale and went to Keswick School. Harry’s close friend was killed in action and this spurred him on to volunteer. His father owned a garage and Harry would help him. This gave him some mechanical knowledge and…

PChubbWF1814.jpg
Bill Chubb had several challenges in his early life and his father died when Bill was 12. After several jobs he joined the RAF as a flight engineer. He became part of a Canadian crew, despite some objection! Bill tells many tales of his RAF time,…

PFisherT1701.jpg
Thomas Fisher trained initially as a fitter in the RAF. When the Air Ministry announced that flight engineers were needed from the ranks of the ground mechanics he volunteered for training. The CO was surprised that he volunteered and asked him if it…

PFreemanR1801.jpg
Ralph Freeman volunteered for the RAF in 1942. He began initial training in March 1943 and was posted to Manitoba in October, where he qualified as a pilot after training on Cornells and Ansons. Upon returning to Great Britain, Freeman was remustered…

AGouldWP180619.mp3
William Gould joined the Air Defence Cadet Corps at his Grammar School in Stoke on Trent. After selection to join the RAF as a wireless operator/air gunner he went to RAF Eastchurch to remuster as a flight engineer, and from there did his training…

AHyndC171115.mp3
Summary: Colin Hynd joined the RAF in November 1943. Upon completing initial training, he was posted to RAF St Athan, where he trained as a flight engineer. He struggled to bond with his first crew, so instead worked as an instructor before joining a…

PKeyEG1701.jpg
Ted Key was a flight engineer. He was born to a large family in London which he remembers coming down from Norfolk to visit. His father was in the Navy as a chief petty officer and away a lot. Ted was in the air defence cadet corps before he joined…

PMorganA1701.jpg
Alan Morgan was an apprentice toolmaker and therefore working in a Reserved Occupation when he volunteered for air crew with his friend and fellow apprentice. His friend was killed on his first operation. Alan trained as a flight engineer. On one…

EWynnIAWynnK42XXXX-0001.jpg
Address in Lancashire postmarked Glamorgan.
Output Formats

atom, dc-rdf, dcmes-xml, json, omeka-xml, rss2